Questions & Answers for: replace hot pot pump Irons

Question about Classic 3964 Iron with Auto Shut-off

1 Answer

...hot. I was thinking of throwing it away. Any suggestions? If you are using tap water then the hardness of the water could cause the problem. You can usually fix this buy running vinegar water through ...

Ad

Question about EP1005 Iron

1 Answer

...hot to hold onto. Product is an Euro-Pro Ironing Solution. Ironing system includes the iron and ironing board together. I purchased a silicone heat protector for a pot handle and sewed it together ...

Ad

replace the spring approx every 6 months as the replacement is obviously not meant for the job and wears or rusts or breaks. However, I am getting extended use from my otherwise broken iron. Take care

Question about Professional DE841 Iron

2 Answers

...hot, let it steam into the sink, pressing the steam button over and over to let the descaler work through all the tubes/passages, until it has all been pumped out. Refill with more descaler (if it is ...

Question about Professional DE841 Iron

1 Answer

just pumps water through the sole plate and no steam Is the iron getting hot at all ? If it is not, then there is an electrical fault - Heating element blown / fuse blown / bad connection / thermostat

...pot on a hot burner. Is there any warning that the tank is empty before turning the iron on? I would refer to the manual for cleaning before using the iron and would not loan anything more valuable ...

Question about Ultraglide 1549 Iron

1 Answer

...generator model 2929 no longer generating steam - don't hear pump working - iron gets hot but not transfering water there's 2 possibility: 1- electonic board is defectuose 2- pump is ...

...hot when I use the ROwenta iron The plug is not making proper contact in the wall socket. Clean the pins with steel wool or pot scourer. Do not use water. If you are using a double adapter remove it ...

Question about DG5030 Iron

1 Answer

...hot. follow this steps and fix it. God bless you Unplug the iron. Use a fine sewing needle to unclog the steam valve assembly. Also, check the valve spring and replace it if it is broken or has lost ...

Question about DG5030 Iron

1 Answer

Pump ok when tested directly on mains but, does not come on by switch on the iron. Thanks I have a genesis iron,it lights when it is on but does not become hot .it stays cold.What might be the problem

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...