Questions & Answers for: Ecoquest replace rci Computers & Internet

...Replace RCI cell" appears, whichever comes first. The UV bulb loses its intensity over this period of time. Eric Download PDF Manual Need change the whole RCI cell since the u.v light is inside the ...

replace RCI Cell" message came on, so I ordered and installed the new Cell. The power and fan come on, but no UV light. The message still says "replace RCI Cell". I had the company send me another one

...and nothing after speaking with c.s. it is to do with the brain and needs to have the master card replaced, cost about $200.00. Do you also have an issue with the 'perform cleaning' reset button?

RCI cell. Damage from water may result. 7. Rear lint screen cleaning: You have two options When visibly dirty, simply remove the rear lint screen from the unit and with a duster attachment on a vacuum

...replace rci cell and i put new ones in and neither one of them light up and thay bot still say replace rci cell stiil after replaced them This is happening to my unit also... One of the dealers told ...

...my rci cell, but it still says replace rci cell. I sent the cell back and they said it was fine. What could the problem be? you have to reset after replacing the RCI cell there is a reset ...

...the "honeycomb" with the blue UV light. This is the normal purifier in the machine. It needs to be replaced about every 3 years, as the UV loses its power, even though it may still be lighting up. ...

...replace the rci? I can already tell a difference in allergy symptoms in the 1st 24hrs it has been off. Thanks!!! By all means run the unit while you wait for the new RCI cell. The purifier will be ...

replace RCI filter as it did when it quit working..Thanks. Perhaps, the tab on the filter frame, that triggers the safety switch is not making contact. Remove the filter and reinstall the filter. Make

...replace rci and they both blink at start up. If you push the purifier button up to 250 or any range they quit flashing and run. When you turn them off and back on they just blink again. What can I ...