Questions & Answers for: Microsoft set up raid 1 Computers & Internet

...raid drives Dell Server with 3 scsi drives, would like to set this up with one drive being the c drive with OS and the other two drives as a raid with Parity, is this possible You're going to need ...

...RAID. I beleave RAID5 needs all 3 disks to be present and maybe even on the same channels as they where set up for really id depends on the capability of your software or hard card. Good Luck! Thank ...

...going for coping files for installation it didn't find hard drives on machine. Is there any BIOS setting for finding SATA hard drive? I would go into the BIOS and make sure your SATA controller is ...

...RAID 0 set and data on a RAID 5 set. The computer says that the files in windows/system32/config/.... are corrupt. This is easily fixable if I could gain access to the set, but I cant I have tried ...

installation problem of win98 in a sata hdd i can not install windows 98 in a sata hdd try using third party raid driver and set bios to legacy device

...RAID-1 on 2 different drives, then break the mirror and mark the second drive as an active boot drive. After looking around online, I realize that this process is more complicated than pushing a few ...

set as Raid 1. But if just want that other HDD for Space on your computer, all you had to do was plug it in and there you go... extra space. Now if your installing windows 7 on the other drive i would

set up a RAID 0 array with my 2 HDDs. During Windows setup, I am asked to insert a floppy/cd/dvd/usb flash disk with a driver. I have found out that I needed a RAID driver, found it, and downloaded it

set up a RAID 0 array with my 2 HDDs. During Windows setup, I am asked to insert a floppy/cd/dvd/usb flash disk with a driver. I have found out that I needed a RAID driver, found it, and downloaded it

...set up to be on a certain "RAID" setting or mode that might prevent it from being seen within Windows XP. What I am trying to get at is that maybe that last drive "mirrors" another drive by default. ...