Questions & Answers for: Microsoft XP setting up raid 1

...setting for finding SATA hard drive? Hi! You need to copy the SATA drivers from the motherboard CD into a floppy diskette. When you are booting with the windows xp installation CD you can see a ...

...setting and not RAID, if it is using RAID then it may need to load a special driver to install windows. This is the most likely cause of your problem, can you also check and make sure the bios is ...

...setting from SATA Raid to IDE, then it should work Windows requires exclusive access to the disk when running chkdsk. You don't run chkdsk from dos. Run it from the command prompt in windows if you ...

I want to be able to Mirror or RAID-1 .... I want to be able to Mirror or RAID-1 on 2 different drives, then break the mirror and mark the second drive as an active boot drive. After looking around ...

...T READ HARD DRIVE, CHECK DRIVE CONFIGURATION EN PAD TO BOOT YA KNOW THE SMALL TEXT FILE IN THE BOOT SETTINGS. WHEN ACCESSING MAINTENENCE IN DE CONFIGURATION WINDOW ... ADVANCED SETTINGS. BUT I CANT ...

...RAID" setting or mode that might prevent it from being seen within Windows XP. What I am trying to get at is that maybe that last drive "mirrors" another drive by default. Please try also to download ...

...By default XP installer will not detect your SATA HDD which is in your B23 C2D Laptop. Change ACHI settings in BIOS. And try again booting WIN XP CD. If you are unable to find any ACHI Settings in ...