Questions & Answers for: sparkplug ATVs

the starter will turn the motor over but not start it johnnymleder, Remove sparkplug from engine. reconnect sparkplug to sparkplug wire. Make sure sparkplug is in contact with engine cylinder head. If

there is no fire coming to the sparkplugs, and no puls when i turn the ignition onto start the car check the stator and cdi box.

access to sparkplugs you might have to remove seat and fuel tank to get to plugs i have not worked on such a new model ? i hope this helps

idles but wont take gas check for bad fuel,weak sparkplug,restricted fuel flow,clogged air cleaner

cranks but no fire to the sparkplugs 1907 susuki 1970 maybe ? size ? does it have a battery ?

how come boys 400 atv will crank all day but won't start, new battery, new plug that sparkplug goes in. there is no spark at the sparkplug how does the sequence fire from what to what? Electrical ...

...think its fireing You need to first determine whether the problem is fuel or electrical. Remove the sparkplug and pour in a small quantity of gas. Replace sparkplug and high tension lead. Crank it ...

...from pre-mix or an oil injection tank. Also 2-strokes have simply a finned head that the sparkplug screws into directly in the center of the head. While a 4-stroke may have one or more

doesn't start. get gas and fire. Very little info to go on here. Remove the sparkplug and dump some gas down the plug hole. Re-install the sparkplug and crank her over. If it tries to start, then your

...on but still no spark what next? It may be too simple but I have to ask, are you using a known good sparkplug, high tension lead and plug cap? Next is either the source coil isn't providing power to ...