Questions & Answers for: Sharp transport lock Computers & Internet

lock switch is for Transport, It locks the Scanner, so as to not damage while in transport. When installing/setting up the machine this should be removed? If not sometimes people accidently bump it to

...to the "lock" or "unlock" position. Turn this clear plastic dial. Be sure to lock the unit when transporting

...transport stopper that sometimes gets turned by accident when the user tries to clean the machine. If your model has such a stopper to locate it look in the cavity where the paper comes out of the ...

...lock on the underside of the top part where you get your copies out that is for locking the scanner during transport. Make sure it is in the unlocked position. I usually remove those as it causes a ...

...to remove your copies. I just usually completely REMOVE the stupid thing because it's only for transporting the unit... and it causes more problems than it

...lock scanner into place for safe transport) located to the left of the copier and just under the scanner. It's a plastic dial that needs to be turned to the "unlock" position. Once done, your problem ...

...lock under the scanner section get pushed or turn. this is stop the scanner from moving in transport. it is right above where the paper comes out. you will have to look for it. it protudes uner the ...

...be locked or unlocked. It is used to protect the moving parts inside the machine when it is moved/transported. Someone in our office was just making copies and ttapping their fingers on it and they ...

...to start Yes it needs to be unlocked, that lock is a travelling position to be only used to stop movement of the scanner during transport. the switch is often bumped, it's undernear the scanner

...lock Check and remedy Check transport motor operation with SIM3-3. F1 03 Content Sorter guide bar rocking motor trouble Detail Sorter guide bar rocking motor drive error Cause Motor lock Motor speed ...