How to pair my wireles case logic keyboard with my tv
Hello Sheatha, a few information doesn't help, but the first thing you should know if both are compatible with each other; Do you have a Wifi adapter that allows you to connect to this keyboard? I don't think it is objective to pair a keyboard to TV or SmartTv.
How to connect a bluetooth mouse to a computer
Use your Computer to search for Bluetooth devices. How to search depends up on the version of Windows you have on your computer. After searching, if your computer finds your bluetooth mouse, then you select it and select connect.
I've shown you (in the pic attached) how to go about this process on my computer.
Charging battery
Sometimes if charged too long or your not around when the light does go off, after awhile the battery looses its charge. when that happens the charger will start to charge again and it will seem that it isn't working right or charging. in your instruction booklet it should tell you how long it should take to charge. some say 45 min some say hours. set a timer once you find the time recommended for your device, once it goes off unplug if light is off. good luck
This mouse worked fine for several weeks. But
Mice and keyboards only last so long. Some are better than others; however, its time to get a new one. I suggest you put up about $30 and get a Mouse/Keyboard Wireless set. No wires and no fuss.
Help Tracking Lost Cell-Phone
To be able to track your phone you should have installed a tracking software on it when you were owning it.You cannot track by imei number but only the phone can be bared from a network.So if you lose your phone say in the Uk and the owner report it as lost,that phone cannot be used on any Uk networks but it may well work in a foreign country.Hope this help to clear your mind.
Ikbt-50 driver needed
You don't need a driver! This is a Bluetooth keyboard. What you need to do, is pair it with your Bluetooth device.
First, charge the keyboard. Enable Bluetooth on your device. Now, push the small black button marked "ID" on the back of the keyboard. The button needs to go in pretty far. This will generate the Bluetooth code needed to pair your Device. You need to enter the four digit numerical code generated by the keyboard. That's it! You are paired!
Need pairing instructions for the case logic ikbt
You probably have the same problem I had. First, charge the keyboard. Enable Bluetooth on your device. Now, push the small black button marked "ID" on the back of the keyboard. The button needs to go in pretty far. This will generate the Bluetooth code needed to pair your Device. You need to enter the four digit numerical code generated by the keyboard. That's it! You are paired!
Not finding what you are looking for?
