Ergotron Recent Questions, Troubleshooting Help & Support

when you booting computer press caps lock and num lock led lights functioning when press if so keyboard fine. else http://www.wikihow.com/Easily-Fix-a-Keyboard-on-Windows-Vista please uninstall and reinstall keyboard from device driver

It sounds like She closed it with it not quite aligned properly.

First try lift up on it a bit while pulling it out some, if it's jammed it may take quite a bit of force. If you have more than one person 1 might lift and the other pull.

If this is tried with no success, you may have to go underneath the desk with a screwdriver and remove one of the sliderails in order to dislodge it. Once loose seperate the sliderails from the mounts and then reattach the mount to the desk. Then insert the rollers into the mount (Holding tray at a 45 deg angle.) Once the rollers are in tilt the tray down and push the tray in to seat it. It should click into place when it catches. It should now be able to slide as normal.

Hope this helps
Dave

Have you considered loosening the tension.

I am assuming you are using these instructions.

Hello rolf....Here is a product that may work for your purpose: This Dual Monitor Stand uses (2) 200 x 100 VESA brackets to hold your 23" to 31" televisions, weighing less than 50 lbs. VESA brackets are designed with manufacturers to fit most televisions, and we include all necessary hardware to attach your monitor, though some televisions will require specific screws you can buy at a local hardware store. This dual monitor stand has (2) 19" x 60" banners (one on each side of the stand). Each banner is made of an adhesive vinyl attached to a styrene backboard for a durable graphic. This dual monitor stand also has (2) large acrylic shelves that you can place merchandise or other electronic equipment.

The monitor stand has an optional tilt bracket available. Angling the top monitor makes it easier for passersby to view the screen. A monitor stand has (4) plastic strips that fit into channels along the back of the display to keep wires neat & out of view. A monitor stand is made from aluminum with a satin silver finish. This plasma stand is commonly found in retail stores, casinos, and also at trade shows.

If you like this product but need a different size, check out our complete product line at:


Your best bet may be to go to this monitor-stands.us.com and peruse their entire line. Joe

Thanks for choosing Fixya!

it will work on the mouse its self, for the mouse pad throw it in the dish washer on the top rack then let it air dry.