Memorex MPS1500 5 Sheet Strip Cut Paper Shredder. It will not turn on?
Question edited for clarity, 'make model (what it is)'.Question moved from Misc category to Make Model.There is not much help in the link. They are a very simple circuit, power goes into a switch, the switch sends power to the motor, and that turns gears and the cutters. If you were shredding at the time, most have overheat protection. 10 minutes running, 5 sheets at a time, 20 minutes cool down. The other thing about this particular shredder is that it has a basket and head safety. There is a switch under the head that a pin on the basket inserts into. Make sure the head is securely latched.
https://www.manualslib.com/manual/101937/Memorex-Mps1500.html?page=5#manual..
My memorex hdmi mirror for android isn't putting out wifi signal
It seems like the Wi-Fi module on your Memorex HDMI Mirror may be faulty or malfunctioning, preventing it from broadcasting a Wi-Fi signal. Here are a few troubleshooting steps you can try:
Make sure your Memorex HDMI Mirror is within range of your Wi-Fi router. Move it closer to see if it picks up the signal.
Reset the Wi-Fi module by pressing and holding the reset button on the device for at least 10 seconds. Make sure the device is not connected to the TV while doing this.
Try connecting the Memorex HDMI Mirror to a different HDMI port on your TV to see if that resolves the issue.
Check if there are any firmware updates available for the device. If there are, update the firmware and try again.
If none of the above steps work, you may need to contact Memorex customer support or take the device to a repair shop to have it checked for any hardware issues.
2/24/2023 2:32:24 PM •
Memorex...
•
Answered
on Feb 24, 2023
How do I power on my Memorex HDMI screen mirroring device
- Make sure the device is properly plugged into a functioning HDMI port on your TV.
- Check the power cord for the device to make sure it is properly plugged into a functioning outlet.
- Check the TV's settings to ensure that the correct HDMI input is selected.
- Press the power button on the device to turn it on. If the device has a separate power switch, make sure it is in the "On" position.
1/3/2023 11:31:16 PM •
Memorex...
•
Answered
on Jan 03, 2023
My memorex hdmi mirror for android isn't working
Hi,
Once memorex is connected to your tv and you've provided the correct username and password for your hotspot, then everything should work at least at some pace.
Please keep in mind that any type of streaming over mobile data maybe limited based on your mobile plan.
Whereas if you use, home or office based wifi, the streaming should be more fluid.
If still having an issue, please unplug and then plug back your memorex device before trying to connect to wifi again.
Thank you.
10/15/2022 9:37:43 PM •
Memorex...
•
Answered
on Oct 15, 2022
How do you upload pictures
It will automatically default to default background directory. When the
default directory opens look up top and there will be a browse photo
button. Click on it and then choose C: drive and then the directory or
folder your pics are in.
6/7/2022 3:15:12 AM •
Memorex...
•
Answered
on Jun 07, 2022
Memorex DVD player won't turn on.
Unfortunately Kari something inside the player is defective, take it to a repair shop, I can guide you on how to fix it if you have electronic knowlege
NOTHING WORKS ON DVD PLAYER
My daughters had the same problem, try replacing C411 (I think that was the number on the board), its a 10V 1000uf capacitor in what appears to be the 5V power supply section toward the right rear of the main board, that fixed it. On hers the capacitor was swelled up on the end. I checked it out of the circuit and the DVM I used only indicated it had about 500uf capacity.
Not finding what you are looking for?
