Does not charge battery
Change dry capacitor C13 47uF/50V. Change capacitor C17 220uF/35V if bulged. While you are soldering, change capacitor C16 10uF/50V at the same time.
4/23/2019 8:09:30 AM •
Powercom...
•
Answered
on Apr 23, 2019
AC Volts on Input when loaded
If you're saying that there is voltage output on the input wire when unplugged from the wall you should contact the manufactureer as this is a defect.
10/28/2014 5:01:43 PM •
Powercom...
•
Answered
on Oct 28, 2014
Hi, I have two of these UPS and in both the
try removing the fans and remove a sticker at the centre, to find bearings,clean them with a cloth then spray Iso-Propyl alcohol (IP) clean with dry cloth put few drops of low viscosity oil(2T oil will help).tell me if the noise do reduce.
9/29/2013 4:32:19 AM •
Powercom...
•
Answered
on Sep 29, 2013
Not finding what you are looking for?