1
Daniel Harling posted an answer for this NetGear ProSafe GS748T 48-port Gigabit Smart Switch 48 x 10/100/1000Base-T LAN 4 x SFP (mini-GBIC) E... (GS748TNAFT):
"Heat is a legitimate concern. Make sure all the cooling fans are working properly. Check..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe GSM7248 48-Port Gigabit Ethernet Switch:
"If the password has been set to something other than the default, you can reset it using..."
Daniel HarlingDaniel Harling posted an answer for this NetGear Computers & Internet:
"It's kinda hard to answer these when we don't know the product name or model number. If..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe JGS524 (DHJGS524NA):
"The JGS524 is an unmanaged switch; there are no settings. Disconnect everything from the..."
Daniel Harling
Daniel Harling posted an answer for this NetGear PROSAFE FS728TP 24Port Ethernet Switch (FS728TP100NASBND):
"The reset button only reboots the router. If so equipped, a separate "Factory Defaults"..."
Daniel Harling
Daniel Harling posted an answer for this NetGear FS108 Networking Switch:
"Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using..."
Daniel HarlingDaniel Harling posted an answer for this NetGear FSM726 (fsm726kit):
"I'm not sure if this switch's serial port baud rate can be changed. Try various speeds."
Daniel Harling
Daniel Harling posted an answer for this NetGear FS608 Networking Switch:
"A router between your ISP and the switch will assign addresses to your PC, the printers,..."
Daniel Harling
Daniel Harling posted an answer for this NetGear GS724T ProSafe 24Port Gigabit Smart Switch (GS724T300NAS):
"This is odd. Note that "on the same subnet" means the switches need to be within the same..."
Daniel Harling
Daniel Harling posted an answer for this NetGear JGS524F ProSafe 24-Port Gigabit Rackmount Switch with 2 SFP Slots (JGS524FNA):
"Strictly speaking, it won't manage VLANs. It may very well forward packets with their..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe GS748TP 48-Port Gigabit Ethernet Switch (GS748TP-100NAS):
"Not a lot of detail to go on. This is a partially-managed "smart switch", so any number..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe GSM7312 Ethernet Switch (DHGSM7312NA):
"Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using..."
Daniel Harling
Daniel Harling posted an answer for this NetGear 48-PORT 10/100/1000MBP SWITCH GS748TR-100NAS (GS748TR100NAS):
"I'm going to assume this is a GS748 variant, based on your mention of Smartwizard. These..."
Daniel HarlingDaniel Harling posted an answer for this NetGear Computers & Internet:
"When upgrading firmware on these switches--especially across major revisions (e.g., 3.x to..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe FSM726T (FS726TNAKIT) 24x10/100 Mbps and 2x1000 Mbps Networking Switch:
"Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe GS748T 48-Port Gigabit Ethernet Switch (969163):
"First, make sure your switch and PC are in the same broadcast domain/subnet, and that..."
Daniel Harling
Daniel Harling posted an answer for this NetGear FSM7326P Networking Switch:
"Netgear FSM (and GSM) switches have an RS232 serial console port. Connect to that using..."
Daniel HarlingDaniel Harling posted an answer for this NetGear ProSafe JGS524 (DHJGS524NA):
"The JGS is an unmanaged switch. It has no settings to configure or reset. When it..."
Daniel Harling
Daniel Harling posted an answer for this NetGear ProSafe GSM7212 (GSM7212NABND) 12x1000 Mbps Networking Switch:
"Netgear GSM switches have an RS232 serial console port. Connect to that using Hyperterm,..."
Daniel Harling
Daniel Harling posted an answer for this NetGear FS524 24x10/100 Mbps Networking Switch:
"I agree with the above answer, with the caveat that if you are using any features of the..."
Daniel Harling
Daniel Harling posted an answer for this NetGear JFS524 24-Port Ethernet Switch (0606449023831):
"I'll go one step further and point out: 1) The JFS5xx is an unmanaged switch, so it..."
Daniel Harling
Daniel Harling posted an answer for this NetGear FS728TP-100NAS 24-Port Ethernet Switch:
"The 5.x firmware documentation include this caveat: Please make sure the firmware..."
Daniel Harling
Daniel Harling posted an answer for this NetGear GSM712 Managed Gigabit Ethernet Network Switch - GSM712 (GSM712NAR):
"Netgear GSM switches have an RS232 serial console port. Connect to that using Hyperterm,..."
Daniel HarlingDaniel Harling posted an answer for this NetGear ProSafe GS748T 48-port Gigabit Smart Switch 48 x 10/100/1000Base-T LAN 4 x SFP (mini-GBIC) E... (GS748TNAFT):
"(Answering a six-year-old question...) From the description--especially the part about..."
Daniel Harling
Daniel Harling posted an answer for this NetGear Prosafe GSM7224P Ethernet Switch - GSM7224P-100NAS:
"Leave it to me to find the answer right after I post the question. As it turns out, you..."
Daniel Harling
Computers & Internet 25 answers
