1
joes_box posted an answer for this Visioneer OneTouch 8920 Flatbed Scanner:
"Found the answer to my problem, my p[problem getting inside the 8920. You need to remove..."
joes_boxjoes_box posted an answer for this Visioneer OneTouch 8920 Flatbed Scanner:
"I get a message on my screen, 'unlock the hardware lock' when trying to scan. The lock is..."
joes_box
joes_box posted an answer for this 2003 Ford Expedition:
"engine hesitates and briefly cuts out but doesn't stall, 4.6L No code are showing up"
joes_boxjoes_box posted an answer for this 2003 Ford Expedition:
"Mine turned out to be the vacuum hose from the PCV was leaking."
joes_box
joes_box posted an answer for this 2004 Ford F150:
"my 04 f150 had a rough idle and would sometimes stall out. dealer said it was throttle..."
joes_boxjoes_box posted an answer for this 2004 Ford F150:
"Sounds similar to my problem. Diagnostics said coils bad, O2 sensor sticking, MAS needed..."
joes_boxjoes_box posted a question about 2003 Ford Expedition:
"How do I locate the MAS in a 4.6L 2003 Ford Expedition. Need to spray cleaner on it but..."
joes_boxjoes_box posted an answer for this 2003 Ford Expedition:
"DOOR AJAR LIGHT COMES ON AND LIGHTS STAY ON BUT ALL DOORS ARE CLOSED"
joes_boxjoes_box posted an answer for this 2003 Ford Expedition:
"Use WD40 or similar on the door latches on all doors including the back lift door. Open..."
joes_box
joes_box posted a question about 1966 Ford Mustang:
"1966 Mustang I6 cranks and fires if i use starter fluid in the air intake, but stops..."
joes_box
Cars & Trucks 3 answers
Office Equipment &... 1 answer