I like to help
John Hannah posted an answer for this Vivitar 2800 Flash:
"Yeah Rolo, I read that too. I would put a slave unit on your Vivitar, and the Master would..."
John Hannah posted an answer for this Vivitar 2800 Flash:
"1 Does it give the normal little charge up whine when you turn it on? 2 Are the battery..."
John Hannah posted an answer for this SanDisk Cameras:
"Dear Adriana, Try downloading your pictures through a USB2 card reader. I have found that..."
John Hannah posted an answer for this Metz mecablitz 45 CL-4 TTL Flash:
"Being a function photographer myself, I'm sure that your son like myself always has backup..."
John Hannah posted an answer for this Metz Mecablitz 60CT4 TTL Flash:
"About 8 seconds is normal. Metz actually instruct owners to discharge the flash at full..."
John Hannah posted an answer for this Metz 60CT-1 Flash:
"Is the top dial set on AUTO? Is the sensor window clean or obstructed? Checking both of..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"Are you saying that you turn your camera on and the lens emerges, and then you plug in a..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"You are right not to trust the camera until the problem is solved. I think it may have..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"Do you mean the focussing ring fell off? It can be reglued with Superglue, but be very..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"So are you saying it takes pictures indoors? Please describe your problem more clearly,..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"Sounds like an electronics problem. Try resetting in the setup window. Remove and replace..."
John Hannah posted an answer for this Casio Exilim EX-S500 Digital Camera:
"You could try a vacuum cleaner. Thoroughly clean the inside and outside end of your vacuum..."
John Hannah posted an answer for this Fuji Cameras:
"1 Is the charger unit OK? Connect a voltmeter to the camera plug to test the voltage...."
John Hannah posted an answer for this Metz 60CT-1 Flash:
"Hi Canday, As the connections are OK, it is possible that a lead inside one of the wires..."
Cameras 14 answers