1
Kurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Hey if you look at poulan starter rope there is a solution posted for how to re-wrap the..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"This saw is new I believe you said, so this should be easy. Step 1: Pull out choke lever..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"The place that the spring hooks to is inside the rope housing. The rope spindle hooks into..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"hey fark This is easy. Take off rope housing (four screws). Once off, pull the string out..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"hey pete This is easy, prime bulb 5 to 7 times with choke lever full out. Pull string,..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"check that plug is getting spark (remove plug, w/ cap attached hold tip of plug on cooling..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"filtered line from tank goes into top inlet at carb. bottom inlet receives line that goes..."
Kurt HuebschKurt Huebsch posted a question about Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"saw wont start. after many pulls gas comes out of exhaust."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"to fix starter rope first you must wind spring and place back in housing. just grab spring..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Make sure carb is receiving gas. With saw cold prime 6x's pull out choke no throttle pull..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Try adjusting idle screw big one w/ spring on it.Clockwise 1/2 turn"
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Carb has 2 inlets top inlet connects to tank line with filter on it. Bottom inlet connects..."
Kurt HuebschKurt Huebsch posted an answer for this Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Carb has 2 nipples. top nipple gets line with filter on it from tank, bottom nipple..."
Kurt HuebschKurt Huebsch posted a question about Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX:
"Saw starts then dies Primer bulb was replaced I think its in backwards"
Kurt Huebsch
Garden 12 answers
