Rider111 posted a question about Dell Computers & Internet:
"Hi, I've got a dell optiplex 390 i7 to which I added a gtx780 and a 650w power unit...."
Rider111 posted a question about LG Cell Phones:
"You turned the bluetooth on and it would just say activating and wouldn't really turn on...."
Rider111 posted an answer for this KTM Motorcycles:
"Hi, most likely your cdi unit or ignition coil needs replacing."
Rider111 posted an answer for this Power Motorcycles:
"You need to check if the main fuse isn't blown and also try to source a motorcycle..."
Rider111 posted an answer for this Honda Motorcycles:
"If your referring to the chain size, it's a 530 pitch with 114 links."
Rider111 posted an answer for this Piaggio Motorcycles:
"You need to trace back to where the discharge is taking place, when you connect the..."
Rider111 posted an answer for this Motorcycles:
"Yes, you should remove the subframe to get better access."
Rider111 posted an answer for this Motorcycles:
"looks like it's a Z1's engine, from 1973 to 76 displacement: 903cc"
Rider111 posted an answer for this 2001 Yamaha YZF-R6:
"water pump? In what situations is it overheating? remember they all get a little warmer..."
Rider111 posted an answer for this 2009 Honda CB1000R:
"on that specific model i'm not sure, but usually FI bikes have that connector where you..."
Rider111 posted an answer for this 2010 kawasaki KLX 450R:
"You mean the chain is rubbing on the guide rubber just next to the sprocket? because a 54..."
Rider111 posted an answer for this KTM Motorcycles:
"Take the engine apart and you will find out. Quite possibly will need new piston kit and a..."
Rider111 posted an answer for this Motorcycles:
"Carburettors probably in need of a cleanup inspection/overhaul. Also a good opportunity to..."
Rider111 posted an answer for this 1976 kawasaki KE 125:
"I used automatic transmission fluid (ATF) on my two stroke CR250. Your bike should be the..."
Rider111 posted an answer for this kawasaki Motorcycles:
"You either got the wrong one for your bike year, or it's badly adjusted."
Rider111 posted an answer for this 1977 kawasaki Z 650:
"Garnet Red Candy KC-16-201"
Rider111 posted an answer for this 2006 kawasaki Ninja ZX14:
"take the original seat out, remove the staples, put new cover, use powerstapler to hold..."
Rider111 posted an answer for this Motorcycles:
"You possibly forgot one of the spacer shims that goes on the inside and outside of the..."
Rider111 posted an answer for this 1999 kawasaki ZX-6R Ninja:
"If the engine is warm it should be pushed in, or turned down. If the engine is cold it..."
Rider111 posted an answer for this 2001 Suzuki Burgman 250:
"you mean the valve clearance? i use 0,12mm for the intake and 0,18mm exhaust... hope it..."
Motorcycles 18 answers