Questions & Answers for: over heating cpu - Page 3

Heat sink glued to cpu on GX270 I have a new motherboard and would like to install the cpu from my old board. The cpu is however glued to the heatsink and I can't get the cpu off of the heat sink. I ...

Pentium D problem I got a new Pentium D 2.8 Possessor socket 775 but when I put it into the board it booted, overheated, then shut down. Hi oilian, Be glad it did shut down. If it didn't, your new CPU

heating of cpu i m facing problem with 2.4ghz and intel 845gvsr problem, when i start my pc after sometime it automatically shutsdown after few minute when i re boot i get a message unxpected shutdown

...CPU over heating. It may be because , your heatsink is not fixed properly, to the chips aluminium base due to loose clamping, or it may be due to lack of thermal grease(a chemical compound meant to ...

i took out the processor an i'm waiting for another one Go to a computer-store and buy some "CPU heat paste". You'll need to cover the top of the new CPU with this heat-conducting paste, so that the ...

heating the CPU you want to start the cool down. Same as warming up the board but you want the board to cool down slow. After all this you want to add New thermal paste to the CPU. This helps transfer

my computer keeps shutting down after a few minutes. I have replaced the powersupply as well as the cpu fan. I am being told now that it is the system/motherboard. Is that an accurate answer? When the

heat sink lift up the heat sink is not glued down and keeps shaking. CPU are not glued in they are held down by levers at either end.This might not be your specific desktop it might give you some ...

how do i remove the cpu http://www.youtube.com/watch?v=iwBb8LmI5qI DO NOT ATTEMPT TO OIL OR LUBE FAN THIS CAN END IN DISASTER Thermal compound is a sticky paste that is placed directly onto the CPU. ...

cpu as i saw in youtube video after heating now the display turns black, so if i reball the cpu ic it will work ? try it but cpu units have heat sinks to keep them within operating temp so if you have