Questions & Answers for: raid failure - Page 8

...failure, a precursor to Alzheimer's. But, I want to get this computer going. As of now, I'm on a friend's computer and want to have one of my own. Thanks in advance, "Buck" Hi Buck, I can direct you ...

...screen with flashing cursor ,could be os is missing due to hdd failure You need to get RAID driver onto a floppy - press F6 when xp is loading - otherwise operating system wont recognise you ...

...FAILURE INSERT SYSTEM DISK AND PRESS ENTER. When I try to setup a RAID I get the same message. Your help would be appreciated! Sincerely. Larry Hutsler This is because you either don't have any ...

...raid. now what should i do??? Attach an external hard disc and put all your data in it. If the PC came with this OS then hp must have given a rescue disc, use that to boot and follow the instructions ...

...failure segate barracuda 7200.9 it is two disks raid striped is there any way to remove data from disk or any way to connect them to another machine as a slave how about scanning and trying to repair ...

powar block when i switch on the fan is not working check your power connections, making sure it plugged into the wall not a power strip. try to start. if no fans or lights come on at all most likely ...

...RAID controller card to use with a new machine (yeah, I know, but I waas sloppy with backups). Thanks much Unfortunately the dell website (not me) is not very helpful. Here's what is says about your ...

...RAID settings back to Autodetect (usually accurate). Improperly or poorly seated cabling Try reseating the data cables that connect the drive and its controller at both ends. Hard drive failure Run ...

...failure in 3 months. My disks are in RAID10 (1+0) configuration, so I've just been returning the drives, and the RAID rebuilds, but what's going on? I get a disk error message at boot time, ...

...raid system or you have a possible hardware failure. Try clearing the CMOS on the motherboard. also is your CMOS battery still good? Is the machine over 3 years old. Is your time and date off? try ...