Questions & Answers for: raid failure - Page 5

...for only one disk failure (RAID 5). Having two disks fail is a very bad luck! Hope this helps. the drives are set up in "X-Raid"...does that make it any more likely that the data can be

...failure will not disable the logical drive in Raid 5 concept.Check the BBWC of the Raid  controller. When using Raid 5 you should have a utility that will rebuild the damaged drive? Have you ...

...Raid system was working before copying all my files over ... in theory the data should have been there with the one drive. It was, and I was able to open it. I then again ejected/switched off and ...

...RAID level is tolerant of a single drive failure. If you lose another drive before your new drive rebuilds your data will be lost. Hopefully you have a backup. RAID 5 stripes the data and the parity ...

...failure' Dont you have any levelling inside the machine? Go open and check. When you have replaced the 2 defective drives with a new one, restart the computer and Raid 5 will automatically

Drive failure GET IT RECOVERED/ GET A NEWER ONE AND FIX IT ON PLACE OF OLD OR GET THE DRIVE REPLACED IF UNDER WARRANTY PLEASE VOTE ME THANKS

...failure on our HP Proliant ML370 G3 server. The failed drive is in a RAID 5 configuration, so we simply purchased a replacement drive, and installed it. The problem, is that it doesn't seem to be ...

...failure. i remove the disk and put it back on but i still have the same problem Hello, You may have a damaged hard drive and it needs to be replaced. If the system is still under warranty, Dell will ...

...RAID controller battery failure p 2 days back there was no problem. I could install server 2003. but for some reason i wanted to go for RAID 6. I then removed the CMOS battery. and the jumper next to ...

catastrophic failure windows server backup Quite common if it is not using a dual raid system.