Questions & Answers for: 225 lbs

...Doug there is a lot of oil in there and unoess you laid the bike down there is nothing to worry about. The air pressure depends on the weight of the riders. I run mine around 20 lbs and I am 225 ...

...is the torque for a 2004 F150 spindle nut? The axle nut torque is: 296 ft-lbs for 2WD and 20 ft-lbs for 4WD Make sure you use the correct torque for your application! It's 225 ft.lbs.for a f-150 ...

I need torque specifications for a 1999 jeep cherokee 4.0 225 ft-lbs. @ 3000 rpm

BEARINGS 100 FT LBS. FOR 1981 MODELS. ROD BEARINGS TORQUE IS 40 FT LBS. AND MAIN BEARINGS 100 FT LBS. CYLINDER HEAD BOLTS 80 FT LBS. CRANKSHAFT PULLEY BOLT 225 FT LBS. FAN PULLEY TO BALANCER 20 FT LBS

...cranked but no start) Jeep dealer is saying it only has 25 lbs of cylinder preasure and the timing chain needs to be replaced and a vavle job. how many lbs is it suppose to have 175-225 lbs of ...

...intake Torque Specs : Intake manifold bolts...72-105 in/lbs or 6-9 ft/lbs EGR valve bolts........165-225 in/lbs or 14-19 ft/lbs Remaining little bolts for brackets, etc......72-95 in/lbs or 6-8 ...

...1997 ford tarus A 1997 Jeep Cherokee has 190-hp and 225 ft/lbs of torque at 3,000 rpm. --------------------------------------------------------------------------------------- Tacho Pro 2008 July ...

...fitting, insert supply line into tank, screw in fitting to tank, torque fitting to 220 to 225 inch lbs. or 18 ft lbs. attach remaining end of fuel supply line to fuel pump pressure regulator. Good ...

dodge avenger 2007 ac lbs ON THE LOW SIDE GAUGE YOU READ 35-40 POUNDS ON THE HIGH SIDE YOU NEED TO SEE ABOUT 225 - 250 I WILL LOOK INTO HOW MANY LBS. AND POST IT.

225 le Concorde winterization find bypass for heater put on bypass drain heater hook up compressor with guage no more that 40 lbs pressure open faucets and toilet till air comes out then outside ...