Questions & Answers for: Quantum analysis report Computers & Internet

fquantum fireball lct15 30 gb installed it on a newer computer and it only reads it as a 9 mgb drive dont know whats up is there an instalation disk i can get somewere First of u ll have clear CMOS ...

ATL Superloader with LTO2 drive The Superloader will not initialize and says drive error 3D. I have been able to narrow it down to what I think is happening based on the Xtalk tool. The drive is LTO2 ...

Slave HDD not formatting correctly and displaying low capacity Installed a Quantum Fireball lct15 30 as a Slave HDD in my PC which has a 40GB HDD Master. Creating a Primary Partition with DOS produced

Quantum Fireball lct 30gig not recognized in Dell Dimension 3000 I have the above HD that I'm trying to install in a Dimension 3000. I keep getting a boot up message stating "primary Hard drive 0 not ...

Does the Intel 82801 chipset recognize the full capacity of a quantum 20gb hard drive? Yes it should recognize such small drive. Note that the partitions on the drive will affect how big drives are ...

What can cause a 2680 Error code on a Quantum M1500 tape system? Drive 1 has reported a hardware error, Check with your drive 1 is it blinking with any amber led.

The tape library ATL 7000 that POST failed and report SK=6 ASC=80 ASCQ=00 DOOR WAS OPENED INVENTORY MAY HAVE BEEN CORRUPTED Close door and retry command. just check the front door and rear door closed

...In this case, the motor speed as reported from the optic sensor differs from the speed setting. Analysis: Optic sensor signal issue -- Either the optic sensor signal is not right, or it is read ...