...39;s backlight are a bit loose which explains why it comes back on when tapped. I am positive that unplugging and replugging the inverter cables should do the trick. WOuld like to do it yourself? It ...
...39;s only doing supply output ripple filtering, and even then, you should go OVER, not under the uF rating). Most of the caps that go are 10V 1000uF or 3300uF. I found some great videos of the ...
...39;s only doing supply output ripple filtering, and even then, you should go OVER, not under the uF rating). Most of the caps that go are 10V 1000uF or 3300uF. I found some great videos of the ...
...39;s only doing supply output ripple filtering, and even then, you should go OVER, not under the uF rating). Most of the caps that go are 10V 1000uF or 3300uF. I found some great videos of the ...
...backlight inverter. Hold a flashlight up to the tv when it's turned on, if you see picture, it's the inverter. Try out a company named ShopJimmy.com for parts. They have been wonderful to me ...
Question about 50PFP5332D 50 in. Plasma Television
...39;m thinking backlight inverter. Any clues? look instead in the menu under closed captions-----text feature is turned on in the set OR on a box if one is used.If Text feature box will be near the ...
Question about SRP4004 Remote Control
...39; lcd tv Check with this setup code: .3021 Philips srp4004/27 not working on toshiba 32'' lcd tv? This trouble maybe power supply or inverter boards is defective. first you can test the ...
Question about 50PF9956 50 in. HD-Ready Plasma Television
39; plasma does not have a backlight. The Polaroid 32 can have a incandescent or a florescent backlight. The backlight is accessed by removing the back of the TV and replacing the lamps. &
Question about Sony Kds-55a2020 Kds55a2020 Lamp With Housing Xl5200
...7x then the red light flashes 4x replaced the lamp still doesn't work You have other power supply problems. The replaced lamp may have been good but the backlight power supply may still be ...
Question about 47PFL7422D/37 Television
...39;s a backlight issue one section will be dim and will fade darker or lighter to the other section. It is not a hard on/off line. So if it does fade to dark on one side I would suspect either a ...
Usually answered in minutes!
511 Questions
111 Questions
110 Questions
63 Questions
53 Questions
