Questions & Answers for: bonnet lock

Question about 2000 181

1 Answer

...lock> I took my 99 Laguna to my local mechanic with a stuck bonnet. He pulled the lever from inside and told me to press down on the bonnet at the same time then open the bonnet as normal with the ...

Ad

...lock, bonnet won?t open ,,, You do not need to drill holes in the grill or pay ford £200+ DIY..How? Look into the grill at the top you will find the bottom of 6 plastic revscrews, 4 you get two ...

Ad

Question about 2004 Golf

2 Answers

it is a strip down by taking out the grill etc to reach the underside of the bonnet lock Ps Is the bonnet fully shut or is it sprung about an 20mm if so try getting your fingers underneath it and lift

lock under the bonnet and pull it with pliers.failing that get a screw driver and see if u can push the catch to release the bonnet through the grill.failling that undo the lock through the grill with

Question about 2006 Focus

1 Answer

...bonnet lock assembly. The screws located between air manifold and radiator. 4. Once the screws released, disconnect the alarm cable/socket connected to the lock assembly. 5. Try pull open the bonnet, ...

...bonnet lock on the front of the car.If everything checks out ok,try replacing the bonnet lock.The lock has a micro switch built into it and when the bonnet is open the wipers and washer will not ...

...lock position Honda civic 2005 Bonnet does not close to locking position try adjusting the rubber bobins either side of the bonnet if not that then unloosen the latch then move it up a little then ...

Question about 2002 X-Type

1 Answer

...bonnet to lock, it took WD40 sprayed over all relevant parts and hours of fiddling with bonnet release lever to resolve problem. Bonnet now seems to be lying unevenly. Is this a common problem, what ...

BONNET LOCK ON FORD FOCUS 2003 how to change bonnet lock my was jammed i manage to open the bonnet a by drilling it I have got the lock from the breakers yard. but its only a LOCK WITH THE KEY NOT ALL

bonnet from outside? see if it possible to use a long rod from the ground up in front of the radiator to push the lock plate sideways where the cable is attached you may have to fashion the end to get

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42221 Answers

john h

Level 3 Expert

29497 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...