...bottle to replace the fuel tank; Remove the airbox assembly to expose the carb; Start/run the bike, spray carb cleaner on the open carb; note the RPM or sound of engine. Determine if front cylinder ...
bottle: using your palm, press down and turn counterclockwise. Once the cap is off you'll hopefully see some coolant inside the radiator: if it is anything less than completely full, add coolant/water
...palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ...
...bottle of canola oil at the office for the big shredder, I use the branded oil at home. The amount of shredding most offices do is enough to warrant using vegetable oil since more than likely by the ...
Question about JS55 (Strip-Cut) Shredder
bottle with vinegar, spray the doors lavishly, let them soak the liquid up, wipe them down. Then repeat, wiping doors with paper towels until you get a shine. Also, once you have the doors
Question about JS55 (Strip-Cut) Shredder
...bottle some water around the intake/carb/manifold areas. Any change in idle is suspect. But you may not be able to achieve this, based on choke only operation. SO, my thought is something is plugged ...
Question about JS55 (Strip-Cut) Shredder
...cover (door on the left side) You will see white waste box (bottle) and black part with label how to change waste box. Put your palm on it and push it. Power on your device. Problem should be
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions