Questions & Answers for: chlorinator stand

Hobart AM-14 Sanitizer can be seen going into machine AFTER check valve, but no blue at all on chlorine test strip is this a Hobart chemical system or other? call your chemacle people who service you.

...Chlorinator (stand alone)or Combo Unit with Filter Pump? it depends on your size pool anything over 16 feet should have at least a 4000gph pump. The all in one unit only has a 2000gph and can not be ...

what is warning 93 ? intex salt chlorinator warning 93 Code 93 is Stand By Mode. It means that your operating process is finished.

im getting a blinking 93 and my water wont clear up. 93 is stand by mode indication of the cycle completed.. You may need to increase the cycle time.. The manual is very conservative!!! I have a 14000

what does a 93 code mean You should see this code after the cycle has ended and the unit is on "Stand-By Mode".

Can I fill my aquarium with tap water? you might be able to, but first you need to test your tap water for chlorine.  If these chemicals are present then you will need to remove/neutralize them ...

Can leave the water out overnight in order to get rid of the chlorine? Chlorine is very volatile, so it will evaporate very quickly from your water source. If your water is only treated with chlorine,

...to circulate and try again this afternoon. Any suggestions? I actually have the stand alone intex chlorinator and when I hook it up it reads low flow and high salt. Weird... clean or replace ...

Is there anything on the market to replace chemicals on a new hot tub Don't want to add chemicals to the water and curious if any hot tub owner has a better idea Drain the water weekly. IF you really ...

Why does my unit stay on stand by all the time? Therefore not producing any clorine. Refrigerators don't produce chlorine?