Questions & Answers for: how to clean flue

Question about Heating & Cooling

1 Answer

...dripping down to the top plate of the stove creating horrible smoke and fumes. The flue was cleaned recently. Firstly, what is causing the tar? and secodnly why is it coming down the outside ...

Ad

...Del Masto Hi there. When calling for cold, flame should be large and blue. If orange, clean mixing tube, flue, chimney. If still orange, adjust "air" inlet on mixing tube to get blue flame. Thanks ...

Ad

Question about RM2193 Compact Refrigerator With Ice Box

1 Answer

...clean flue tube and burner and don't know where to go now. Any ideas? (product #9211310-06) ........Thanks Ron rshi5@yahoo.com I had a similar problem. The flue would get hot and the cooling tubes ...

Question about RM2193 Compact Refrigerator With Ice Box

2 Answers

...flue cap, and there will be a little metal hook hanging on the side. Pull this up, and there will be a spiral baffle attached. Look for debris on the baffle, clean if necessary. Also, the bottom edge ...

clean my inside coil on my Rhuud split system It differs between upflow and downflow systems. A downflow can be cleaned by taking the coil cover off and cleaning the coil. An up flow on the other hand

Question about UAKA030 Air Conditioner

0 Answer

dometic refrigerator flue cleaning cleaning flue blow out with air and line to ignitor

Question about H Series Pool & Spa Heater 400k Btu Propane Gas Milivolt Ignition H400p1

0 Answer

...coming out of flue Flames coming out of flue check gas if ok clean burners make sure it is a propane unit if a N in model number it is natural gas orfices incorrect and will overheat very ...

Question about H Series Pool & Spa Heater 400k Btu Propane Gas Milivolt Ignition H400p1

1 Answer

...2913 and like many others it works fine on both AC and DC but has stopped cooling on propane. I cleaned the flue, the flue baffle, the burner and the jet and still no cooling. Any other ...

...accidentally ended up in there. Dumped salt down flue to extinguish. Removed back, vacuumed and cleaned flue. Pilot lit but burners won't ignite. Any ideas? Make sure you turn the knob to on

...spurting fire out the fresh air intake whole at the back of the stove on windy days. I would check flue is clean and not blocked also check the flue terminal on the flue pipe is in good condition

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

john h

Level 3 Expert

29497 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...