Questions & Answers for: connect controller helicopter

...controller/charger only goes on when the helicopter switch is iin the off position It's a typo in the instructions. The helicopter must be turned off to be chaged The helicopter should be shut off ...

...helicopter stopped responding to the controller and it wouldn't take a charge. When I connected the remote to the helicopter the CHG light came on solid for about 30 seconds. This means that the ...

...or any other Smart Board? i think yes but i don't know how to connecti've a problem to connect my helicopter RC to my arduinoif you already have a solve for this problem can you share

...batteries to verify that you have a charged battery pack. If so, verify that your battery is connected to your helicopters circuit. There should be a white plastic connector that plugs the ...

...helicopter controller not working I turn the controller and helicopter on but nothing happens when I move the throttle up and down. The LEDs on the helicopter are on but it doesn't fly. I have tried ...

why won't world tech toys phantom 3.5 ir helicopter charge? check charger if faulty,,then check charging connecting jack in helicopter

controller as follows: Connect the helicopter to the controller as shown in the picture. Make sure there are good batteries in the controller. Turn the helicopter off. Turn the controller on. The red

...helicopter and controller work. I have tried setting controller to all 3 channels with no luck. Any ideas? check over the helicopter first then hand controller heli could be the receiver chip or pick ...

...helicopter and controller for any signs of damage, such as broken or frayed wires, and make sure that all connections are secure. If these steps do not resolve the issue, it may be necessary to seek ...

...controller. When I turn the helicopter on the lights start blinking really fast and the controller blinks red. I pull down on the left stick and the controller light stays a continuous red. It's like ...