Questions & Answers for: control lock ge monogram

...lock" and "pots & pans", even when using reset. Then with the wrong cycle the dishwasher won't start after pressing "start" I think I had and now have again the same issue. I called a repair man who ...

...lock and unlock the oven door. And then the error code F5E1 appear. I tried to unplugged and pluged again but the problem is recuring.....???? Any solution....??? The error code F5 E1 is normally ...

...control lock on ge monogram side by side makes ice but does not dispense ice or water model zfsb23dndss shoud be amatter of pressing abutton and holding in for 3-5 secs to unlock. look closely at the ...

...Control board (ERC), and door lock switch. I would inspect the wiring to , and from the door lock switch for faults. If all wiring is ok, and visibly connected well at the switch, and control board, ...

control lock while cleaning the exterior door. After they left today, I heard a beeping signal from the refrigerator and I found all three control lights on as well as the crushed ice light. I pressed

...control lock Hi, Should be a matter of pressing a button and holding in for 3-5 secs to lock and unlock. Look closely at the control panel it should indicate which button(s). Let me know,if needed ...

appear in the display and the cooktop beeps you have a function error code. Touch the CONTROL LOCK pad. Disconnect power to the cooktop and then reconnect. If an F-code appears again, call for service

...control lock is pressed. Ice maker is still making ice and water is still flowing. I hear the clicking of the microswitch in the top of the electrical housing but water and ice (whichever is selected ...

...lock mechanism. A common problem on many built-in GE ovens (you don't say if yours is built-in or free standing...) is air circulation in the control panel. The fan that keeps the panel cool either ...

...door from being opened when the oven is set for "Clean" mode. The malfunction may be a jammed door lock mechanism, a pinched or broken wire, a faulty lock switch or a fault in the control board ...