Questions & Answers for: cover open shown close

...Open the back cover.Pull the tab toward you to open the rear chute cover.Pull the jammed paper out of the fuser unit. If the jammed paper cannot be pulled out easily, push down the tab with one hand ...

...Open the back cover.Pull the tab toward you to open the rear chute cover.Pull the jammed paper out of the fuser unit. If the jammed paper cannot be pulled out easily, push down the tab with one hand ...

...is a red light that?s marked (ALARM ) this light keeps flashing while indicating the above message on the screen red light means there is an error. check all covers. open all cover and close ...

cover on the canon Powershot G7? The top bit opens and closes, the bottom bit takes ages to close! This blog post outlines repair procedures for stuck lens covers. Recommend trying reader "Jeff's" fix

...open Cover D and close it again but to no avail. Has anyone got any other suggestions, please? Follow the steps below to clear the "Clean Sensor" error message. Open the front cover of the printer ...

Open Cover" message. Ricoh Aficio 2035e showing "Open Cover" message. "Close open cover as shown", but there is nothing shown. I've opened and shut all of the covers I think exist.

...open the cover. 3. Insert the batteries as shown. 4. Close the battery cover. * For the PowerShot S2 IS, PowerShot S3 IS, and PowerShot S5 IS the batteries are inserted in a slightly different order, ...

...COVER IS OPEN AS SHOWN. CLOSE COVER. IT IS SHOWING IN THE PICTURE A VIEW ON THE RIGHT SIDE BOTTOM TRAY. Hello! Make sure that all off the covers and doors are properly closed. If you are sure that ...

...Cover (1) if it is open as shown in the illustration. Close the Outer Back(Rear) Cover. Make sure the cover is closed properly. Pull the paper trays (1) out of the machine. Push the two green ...

...cover to a certain point will restore the login icon There's a sensor (LCD Lid Close Control Switch) that has gone bad.  The sensor controls when the display is shown or not shown based on ...