Question about HP Office Equipment & Supplies
HI ayyasamyr: This your problem. 13.10 PAPER JAM The event log message for a paper-delay jam in the duplexer is 13.10. 1. Check the duplexer and the rear area of the printer for obstructions or damage
error code 57.70 on HP 9500 color printer This is a duplexer fan error code but our machine does not have a duplexer fan installed. What could cause this problem with no duplexer fan? The machine ...
It says 57.7 printer error and cycle power to continue By any chance do you have a duplexer on this printer? The error code says that the duplexer has a bad fan. Power down the printer and remove the ...
...duplex reverse drive asm. Now I am getting the error "Bad Duplexer Connection." I've turned the printer off and on, and I have put back in the original part but still get the "Bad ...
It gives me a bad duplexer connection error, im not sure where a duplexer is located The duplexer on this machine is mounted right on the top where the paper exits. It should have a clear paper guide ...
...Duplex is here: But 59.30 error (Fuser motor startup error/Black or N/A) Follow next instructions: Fuser motor error 1. Reconnect the connectors J4605 for the fuser motor and J1024 on the DC ...
Question about LaserJet 2420 Printer
I have an hp 4300 with a 13.12.00 error when the duplexer is installed I had worked with the duplexer previously, but has now begun to fail. Do I have a bad duplexer? Here is a copy of the 13.12 error
...error occurred where X is detailed below. 0 The duplex mechanism failed 1 The duplex side-adjust failed ________________________________ 1 Turn off the printer, and then turn the printer on to ...
...duplex, the sheet goes into the duplexer but does not come out. Printer shows paper jam error in duplexer. However, when the printer is power cycled, the first sheet will successfully duplex but the ...
...duplex unit., here its confusion. Check with simplex single print, see any paper mismatch error? or printer throwing paper in output bin after successful print?. No.. check fuser out sensor or paper ...
Usually answered in minutes!
5,067 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
