Questions & Answers for: eclipse specs

...specs for a 2004 sebring 3.0 liter engine? I purchased a 2004 sebring engine to put in my 2000 Mitshubishi eclipse. The enigine runs good although the check engine light came on and the idle raises ...

...eclipse had a hydraulic tensioner arm for the timing belt. This device could be faulty although it seems to be working. It's specs call for 75 psi., but they tend to lose pressure after a few years. ...

...specs for this (Timing Belt); Mitsubishi Eclipse Spyder GT 2001 V6 3.0L http://www.onlinefreeebooks.net/go.php?url=http://tearstone.com/eclipsefsm/11D.PDF that should help you out need anything else ...

Eclipse sw9122 sub but I can't find an owners manual to get the manufacturer's recommended enclosure specs. I've heard everything from 1cu.ft. to 3cu.ft. with a ton of different port areas and lengths

...Eclipse-XA4200.html . Scroll down for the specs. The installation instructions are on page 5; the direct link to the manual is http://a248.e.akamai.net/pix.crutchfield.com/Manuals/099/099EA4200.PDF . ...

how torque the head bolts for a mitsubishi eclipse 2002 gs You can check out this link. http://mitsubishiforum.com/forum/eclipse-frequently-asked-question-section-58/head-bolt-torque-specs-16796/

...eclipse 95, don't go into reverse anymore, days ago was hard to get the reverse shift, but after a small lub this was working, but seems that a simple lub is not enough... Check the shift linkage and ...

...eclipse avn110mrc radio system you will get all info on wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, service info, repair info, parts info, ...

...Eclipse Mobile Sound (Specs: 4 # of Channels, 80 x 4 @ 4, ... Model, Manufacturer, Type, sort ... Eclipse 4 channel amps, Premium 32440 and EA3422...kinda ... www.diymobileaudio.com > ... > Car Audio ...

...Eclipse GS. Need torque specs and sequence for rocker arm assembly on a Mitsubishi Eclipse GS 2.4, 16 valve. Had to time it due to bad water pump and took timing belt off too early before I set the ...