Questions & Answers for: endura 30 work

Minn Kota Model 35 24lb thrust transom trolling motor not getting power My wife got her fishing line tangled in the trolling motor. I took off the prop and removed all line. Now the motor is not ...

minn kota Motor not running,now when it's on continuous i have too spin prop by hand then it will work and stop when i turn off switch, but i'm not getting any movement other than that need help.thxs!

...Endura 30 Check to see if there is appropriate voltage getting to the switch (with an ohm meter). You can (please do this carefully) disconnect the battery positive and negative as well as the motor ...

Not getting into the gear I have a problem with the rear gears. They worked fine for the first six months and then I ended up with trouble for the rear gears. They seem to go really slow and the rear ...

Endura 50 Runs only in high speed in forward and reverse Only high speed forward and reverse work. None of the other speeds work. I have installed a new rotary switch with the same results. I supect I

endura 30 lower unit was filled with water and mud/rust. It was working all speeds before I opened it up. I had to hit the lower unit sometimes to get it to spin. The armature contacts have many pits,

My Minn Kota 28lb motor is not working checked battery and terminals all are OK it has been in storage for the last 12 months but was working fine before that check for broken wire where it enters the

Looking for an on/off switch. Switch has three Looking for an on/off switch. Switch has three positiions on it. Off/Fwd/Reverse. Where can I buy one? go to any auto part's store.get a 50 amp 3 way it ...

Endura 30 Freshwater Transom Mount Trolling Motor: I JUST PURCHASED A Pellican pontoon boat 10e and i... I just purchased A Pellican pontoon boat 10e and it came with a Minn kota Endura 30. Is this a ...