Questions & Answers for: faint prints

...faint. Black prints fine, cyan prints fine, magenta prints fine, and yellow prints fine. But if you print a colour that needs a combination of these colours, it is really faint. Have tried replacing ...

...prints very faint horizontal lines in color in the color parts of the document. This is really no improvement, because the document is still illegible. Your post "...it prints very faint horizontal ...

...prints and copies it is the drum. Faint printing can be caused during the transfer phase of printing. There are 4 items to check, Biased transfer roller, this is what transfer the image to the paper. ...

prints a faint line an inch high, all the way across the print.The faint line is not on my file. I've printed several different images the same size with the "faint line" result. I even tried cropping

Faint lines on printing I have faint lines running throughout printed images. It is like this both when printing in color and greyscale. I have replaced the ink catridges but still the same. Of note I

Print is very faint. The printer is working but the print in all colors is much too faint. check your ink cartridges. A lot of the time the ink is very faint when you are near empty on a cartridge.

faint printing Faint printing on samsung ml7140 laser printer -- even when cartridge is new Hi, try adjust the toner aditiute by going in to the printer properties. adjust to 3 if posible and do a ...

When I print with my brother hl-2070n...the print out is very very faint. i have changed the toner and drum...any suggestions? if you printing is just faint, need to replace toner, but if your ...

Canon ir-c2220i Faint Print Hello, The Canon ir-c2220i can only produce faint print. I tried to service the printer, and tried to swap the drum unit and image transfer unit. But, the quality is not ...

...prints faint copies after replacing a fuser unit. the toner cartridge is new Canon printer printing faint or printing black when your printer print head issue. In that situation, you need to do: ...