Questions & Answers for: how to flash a pcm

Question about 1998 Cavalier

1 Answer

PCM needs to learn the new password from the IPC. The password learn procedure is as follows: Attempt to start vehicle, then leave the ignition ON. The THEFT SYSTEM telltale will flash for 10 minutes.

Ad

...a bad TPS go to the dealer and have them fix it only the dealer can flash your PCM also have them check the throttle body and be cairful when they get that code they have a tendency to just stall ...

Ad

Pcm is flashing and no sound out of our receiver If you have the PCM display flashing ,it means it has lost the PCM link with what ever equipment you have connected to this receiver. The light should ...

Question about 2001 Dodge Dakota - 4.7L V8 - Performance Module

1 Answer

does a new pcm need to be flashed bought replacement pcm, does it need flashed Junkyard PCM or re-manufactured from a retailer? If you get one from salvage you need to match up the numbers on the ...

what dose it mean when engin light falshes contstantly Flashing Diag Code P0122 TP circuit low input DETECTION CONDITION • If PCM detects TP sensor voltage at PCM terminal 89 below 0.10 V after engine

...can physically (nuts and bolts ) install and connect the new pcm, but it will not work. It must be flashed with all the vehicles specifications, voltage, fuel metering, rpm, starting data, etc. This ...

...PCM and do not flash the EEPROM, the engine will not run. This DTC indicates that an un-flashed PCM causes the engine cranks but will not run situation. Read more: ...

...PCM flash updates, the next step would be to check some wiring. Inspect and check for proper voltage and ground to the PCM and throughout the associated circuits. If there are problems with them, ...

...flash pcm & same code & they said could be wiring harness so got one from salvage yard & same code, ok so myself and friend that builds trannys for a living pulled it & rebuilt & replaced solenoid ...

Question about 2003 Liberty

2 Answers

...flash codes , you mite think so , but not . You need a scan tool - factory or someother type professional scan tool to read codes . Passive Anti-Theft System (PATS) -Diagnostic Trouble Codes (DTC) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42222 Answers

john h

Level 3 Expert

29497 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...