Questions & Answers for: flush and fill

flush and fill radiator. how do I drain the radiator to flush and fill the coolant. I seem to be having trouble to find the plug enabling me to drain the coolant. ther is not one/get flush and fill ...

...use a funnel to insert flushing agent connect hose and flush through.with radiator cap off.take off bottom hose to radiator to drain system,reconnect all hoses,fill expansion tank to fill

rise and water runs out the over flow tube. It doesn't quit running. Your problem is the water fill valve. Check this link.http://www.rd.com/17646/article17646.html it's not the flapper or flush valve

...flush the dearty filling a clean water insted and sometimes just fill water without flushing the deart (or partialy flushing it). It happand random' sometimes it work and sometimes not/ pls help tks ...

...flush thenwater fills to the fill line and slowly keeps on dripping over the top of the flush valve tube. I would ckeck to see where water fill line is inside toilet tank and then adjust flush valve ...

...fill after the flush. Hi, if you remove the cistern lid and flush the toilet, look at the float (back left) to see if this is rising freely when the water fills back up. Once the water has stopped ...

...flush everything. Check the water level int he tank for it coming up to fill line in tank. Make sure the 1/4 " fill line from the fill valve is connected and in the stand pipe tube to allow water to ...

...flush, it flushes but will not fill. I can turn the water supply off and then back on and the tank fills normally. The toilet is a Kohler 1.6 gal per flush with what looks like a fluidmaster system. ...

flush, (with bubbly sound in the end), my other toilet on the second floor which is on the same vent, works just fine Perhaps it is taking a long time to fill the cistern, take top off and see if it's

...flush fill valve fill fills to slow Usually there is a screan that is on the bottom of fill valve on the outside of tank were the water inlet is you can shut water off and remove srean and flush out ...