Questions & Answers for: handleset

...the linkage onto the "inside" door mechanism? The linkage has come loose from the "inside" door handleset. I can barely get my arm into the door enough to "feel" the hole in the back of the

doorknob sticks in 'lock' position-but no real 'lock' feature I installed a schlange front door handleset and have trouble with the inside doorknob. The handleset itself doesn't have a lock(its a 2 ...

tubular design deadbolt stuck in lock position. Door cannot open. 2 piece tubular handleset has deadbolt stuck in lock position. cannot get door to open. can remove inside screws, but don't know what ...

...fully for a few days after being installed. Why does the interior knob or lever on my front entry handleset sometimes cause the latch mechanism to jam and the exterior thumb press to lock in ...

baldwin door handleset difficult to open due to lever that you push down jiggles instead of being firm to touch Check to see if there is a set screw on the bottom of the handle. It might be loose.

I am replacing old Schlage exterior handleset with a new Schlage exterior handleset. How do I remove circle on interior of door? Some schlage rosettes screw off. They have a special wrench. You might ...

install a single handleset Is this into an existing door or a new door. Is there existing cut outs where the lock set goes or is this a blank door?

weiser deadlatch replacement I need to replace the deadlatch in my Weiser handleset but the part has been discontinued. Is there an equivalent replacement part available? Most post style latches will ...

I have an old schlage door handleset. It is not the one pictured next to this post but that was the closest pic I could find. It has the exterior handle with key lock which locks/unlocks/operates the ...

hi -- i have a kwikset polished brass dakota handleset on my front door. somehow the pin that holds the thumb pedal in place has gotten lost, so the thumb pedal falls out. am i likely to find one of ...