Questions & Answers for: hub printer working

...not be powerfull enough to power the hub, then the printer. Remove the printer and disconnect fron hub for 10 mins or so, and put back into the port the printer was originally in to see if it

...your PC,instead of going through USB hub.Try to move some other device to connect to this hub and connect your printer directly to PC..due to many restriction with printer like

...hub HP printer psc2410 will not print over wireless network using Belkin 5 port USB hub. It used to work and then something changed and it won't print anymore. The Belkin software recongnizes it's ...

...printer I get a hub overload message. I can't reinstall because the computer connect manager doesn't see the printer. It did work until recently Believe it or not, this problem is actually related to ...

...hub Before going to ebay, what should I try to do next ? Goto your Linux configuration utilities and configure your printer again,sometimes after a crash the drivers are reset. Utilities differ under ...

...hub and printer and keyboard (also usb and plugged into hub) are not working. Did I ''fry'' the keyboard and printer with a wrong power? The printer does a self-test and says ''ready'', but won't ...

...of paper" but printer does have paper. Works OK if connected directly to the laptop. USB Hubs are generally a bad idea for big USB devices for big devices like printers and scanners it is ...

printer to hub then to computer 1 works. the cable from hub to computer 2 does not light up on hub and I cannot p Connected one printer to hub to two computers. computer 1 to printer works. computer 2

...printer, what are Mac friendly hubs for this? Would a DE-809TC D-Link hub work? I do not need to connect to the internet (too old to do so anyhow). Any suggestions for a HARDWIRED hub that may work? ...

...printer. Then I removed the P205b Usb cable from the hub all working fine. What might the exact problem? Please advise!!! (Note:Whenever I connected with Fuji printer and restarted the PC, the ...