Questions & Answers for: ide line

the bios always hang up could be a conflict with ide or sata line. unplug all ide and sata except for the boot harddrive and make sure the harddrive jumper settings are set for master or cable select.

...IDE line, Wont boot Have you tried a different IDE cable and/or an IDE port? Make sure your jumpers are set right for the IDE devices. Also if possible try the drives on another computer. This could ...

...line out L power switch and LEDs 1.ide led + 2.P led + 3.ide led - 4. 5. 6. P led - 7.Ex1 SM 8. 9. GND 10. 11.Power switch 12. 13.GND 14.+5 spkr connector 15. 16. GND 17.Reset 18.GND 19.Reset GND ...

...u please give me soluion for this problem... Good day, ' There are several component we need to consider in order for us to give you a more appropriate solution to your dilemma. 1. There are pin ...

...IDE, on-board sound. Cons: Only supports one diskette drive The Bottom Line: Good for building a modest system. It is still useful today. Reliable performance. 6 PCI slots make is very expandable. ...

...IDE-3 means Sec slave single or master ::::: master with slave ::':: slave :::': black line between dots is plastic jumper note the plastic jumper is ' located at the rear of the hard ...

...IDE-3 means Sec slave  single or master :::::master with slave ::|::                 slave  :::|:black line ...

THE WIRES CONNECTING HARDDRIVE TO HP PAVILION503n The HP Pavilion 503n Desktop PC uses an IDE (PATA) harddrive,HP Support > Pavilion 503n Desktop PC > Main Support page,http://h10025.www1.hp.com

...IDE-3 means Sec slave single or master ::::: master with slave ::':: slave :::': black line between dots is plastic jumper note the plastic jumper is ' located at the rear of the hard drive between ...

...Slave on a single cable. This leaves the second IDE open for expansion down the line. You could also do 1 device per ribbon and leave as Cable select. ...