Questions & Answers for: insert fuser

...a 50.2 fuser error. I have done all the troubleshooting I can including taking the fuser out and re-inserting it. The fuser sheet is ok but there is a lot of ink on it. looks like I need to replace ...

CANON IR C6800 FIND THE ERROR CODE E00006-0001 That code is refering to the Fuser Unit being inserted fully. Have you tried pulling the Fuser Unit out part way, then reinserting fully. If this does ...

...on and off again... Xerox Phaser 5500 Was working fine yesterday. please check if the fuser is inserted

...turn off printer and unplug it. remove the fuser wait 20 minutes reinstall fuser insert power cord, power on. wait for it to initialize. If error comes back...you've got a bad fuser or power ...

...error The fuser unit may not be seated or inserted properly. Try removing the fuser unit and insert it back into the printer. Make sure the two spring contacts in the fuser unit are seated

...are clean and insert it back into the printer. The fuser unit will be very hot if it is working. If the printer still gives this error message then the fuser unit may be faulty and needs

...insert the fuser into the printer. Test it out, if it still has this error then the fuser heating element or temp sensor is bad. Is the fuser a new HP or rebuilt fuser? Some of the rebuilt ones may ...

...Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and then insert the fuser wiper cover Or watch this video Lexmark Product Videos click on Service ...

Insert a flat-blade screwdriver to push the fuser lock (gray colored) on the rear unit and the fuser unit is separated from the rear unit (rails). Do it both ends of the rear unit. 3. Check or replace

...is it possible I have a failed HVPS? Or Fuser has failed ? Is there a sensor that detects the Fuser inserted near the fuser that may have malfunctioned?Tried turning off and on again several times, ...