...fuser oil and my printer stoped in mid run stating error 543 - turned the printer on & off as advised to no avail Do not want to send for a service engineer who charge a £125 to insert a reset code. ...
...Fuser installation error. Fusing unit set error. Remove the fusing unit out of the machine and reinsert it. It isn't seated in there properly. Once you do that the error code will go away. Note: ...
...fuser unit. The first sensor is located under a cover under the transfer unit. i) Open the door ii) Lift out the transfer unit (Q3964A) iii) Locate the black plastic cover plate with a small green ...
...switch, wait 10seconds and turn back on. If you still get the error code the fuser still is not inserted correctly. Hope this helps. PS: Black spots can also indicate a new drum is needed. It may ...
Question about Aficio 3025P Black and White Copier
changed the toner cartridge and wasn't inserted correctly. I reinserted and noticed there was a lot of toner outside of the canister and now it's printing but there is a ghost print as well.How do i ...
...the fuser, insert the two new thermistors, re-assemble, reset the error code and test the copier machine repair. Also, ask the copier technicians to to do a copier cleaning maintenance while on
Question about Aficio 1515MF All-In-One Laser Printer
...fuser sensor, tells the machine the paper arrived there without problems but also says it already got out, once the paper comes out. the fusion must be opened to check this. Now, this machine have ...
Usually answered in minutes!
30 Questions
22 Questions
13 Questions
5 Questions
4 Questions
