Questions & Answers for: Samsung insert fuser Computers & Internet

...fuser unit. Insert it exactly as you removed it, with the active part down. The wires that go to the connector should come out the side opposite to the connector (if you took notice when you ...

...fuser unit. Insert it exactly as you removed it, with the active part down. The wires that go to the connector should come out the side opposite to the connector (if you took notice when you ...

...insert the cartridge. I think your cartridge is jam, check or replace another cartridge in the printer I have the same problem, I've and a removed the Fuser Assembly and noted there is some worn on a ...

Paper jam 2, no jam, no problems, have switched off and on again, have changed toner, have checked springs, have cleared memory, have inserted new paper... fuser faulty.

...have switched off and on again, have changed toner, have checked springs, have cleared memory, have inserted new paper please help Am also faced same problem it is mainly due to Fuser Unit problem... ...

...fuser unit. Insert it exactly as you removed it, with the active part down. The wires that go to the connector should come out the side opposite to the connector (if you took notice when you ...

Samsung CLP-310N when printing it is very noisy Toner cartridges were changed in the printer, and inserted correctly however, since then a loud griding noise is emitting from around the output, ...

check the two fuser power spring contacts, and insert it back in the printer. If the error still occurs then you may need a new fuser unit. You may need to get the printer checked out by a technician

...related to pick up roller related problem. "paperjam 1", its related to cartridge unit, kindly re inserted the cartridge. "paperjam 2", its related fuser unit, kindly open the rear cover of

...the top (.Another door switch is near the front door) .This lever has to be assembled before inserting into the hole and is held in place by a clip. The dogleg hinges into the latch lever. I ...