Questions & Answers for: lens release button

...lens release button which is on the bottom left of the lens mount, and then turn the lens counterclockwise. If this doesn't work then it is most likely a broken lens release button, and you should ...

...lens release button down and turn lens Clock-wise then while holding release button down quickly turn lens counter clock-wise, it should come right off. If it did not then it must be disassembled to ...

...release button ... I took the lens off as recommended, then pushed the shutter release button 25-30 times and the error message went away, then I put the lens on an it works fine so far. try this: ...

...lens release button down, and rotate the lens a nuber of times (in the camera body) before releasing the button. It appears that the issue is poor electrical contact between the lens and camera body. ...

...think it is rotating far enough to release the lens. Thanks, DAVE Make sure any movable rings on the lens are in the proper position. Also, try moving the AF and Manual focus setting on the

...lens release button to the right of the lens mount - make sure it is pressed fully before trying to rotate the lens to remove it. When you press the release button, there is a little pin in the lens ...

...lens. Turn on the camera and press the shutter release button. If you receive an Error 99, turn the camera off and remove the lens. Turn the camera so that it is face down, and gently clean the lens ...

...lens. Turn on the camera and press the shutter release button. If you receive an Error 99, turn the camera off and remove the lens. Turn the camera so that it is face down, and gently clean the lens ...

...lens stuck on body,,how do you unstick it? pushed red release button & tried to unscrew by hand but it will only move about 1/8 of a turn . Normally, these lenses do not 'unscrew'. When you push the ...

...lens release pushes fine, and the lens will turn, but not enough to click and release. Help. Hello, While turning the lens look at the lens mount. Does the lens turn but the mount stay stationary? If ...