...lexmark x642e can any one help, I have no manules .thanks Maintenence counter is in Configuration Mode. Power on the printer while holding down the 2 & 6 buttons. Continue holding buttons for 20 ...
lexmak x642e My dsl went down and when it came back up my employees could no longer print. What should I do? Have you powercycled the printer? Is the printer showing ready, currently?
how to install Lexmark X642e printer Read the manual and follow the instruction provided by your Printer Lexmark. Just read it. Good luck!
Question about X642e All-In-One Laser Printer
I got a new toner cartridge for our x642e and it came with two new fuser wands but no instructions on how to change them. does anyone know how to change them? Are you referring to the fuser wipers? ...
...Lexmark X642e, X642e or X644e Multifunction Printer) and this link: http://bit.ly/awNDER (A 202.xx (x = any number) Paper Jam Message Is Appearing on a Lexmark X64x Series Printer). These are some ...
...LEXMARK X642E FUSER KIT COUNTER Hit the menu button or the Key Button Go into the configuration menu Touch the arrow that says "Reset Maintenance Counter" Select the Yes button. as you can not ...
...Lexmark X642e with 900.80 error (when the ADF scanner is connected). When scanner is not connected, the printer is accessible via network and can print w/o any problem. Firmware is latest: ...
...Lexmark x642e and I'm still getting light horizontal lines approx. every inch or so thru the page Have you tried a different cartridge? Was there much spilled toner inside the printer? If you go into ...
...LEXMARK X642E WHICH CAN NOT SEND OR RECIEVE FAXES. WHEN TRY TO GO INTO FAX SETUP MENU IT SAY MODEM FIALED TO INITIALIZE!! It possible that this is a bad modem, try turning off printer and unplug fax. ...
lexmark x642e error message 954.95 Seems you have a bad interface card.Try replacing it.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
