Questions & Answers for: nt1a

how to fix my rode nt1a i recently dropped my rode nt1s, the protective casing has come off leaving an exposed diaphagm. There is a red wire that seems like it should be attached, but have pushed it ...

works for a few seconds then cuts out my nt1a works for a few seconds then cuts out-lead, channel, ok. Phantom power switched on colin gibson After trying a known good cable, I would try it on another

I'm running my NT1A on pro tools Le and the program only seems to be picking up the left or the right signal but not both????? This is a Mono microphone. Ensure in pro-tools, you select "Mono" when ...

Does the NT1A work with the M-Audio MobilePre USB preamp? The NT1-A will work with any mic preamp that has phantom power.

my mic has gone dead I have a Rode NT1A It will need to be serviced. Condenser Microphone Mod Service Hi, Here is a tip that I wrote that will help you with that... ...

...xlr to usb connection and the power is coming off a laptop , how would I fix this? Thanks The Rode NT1A requires phantom power of 24-48volts DC. The USB socket on your laptop will only supply ...

Rode NT1A: i got an adapter so i can input it in the mic input the pc says an audio device has been put in but i cant find it anywhere! please help me i also have an Acer Z5710 The reason it is not ...

Rode NT1a Hum and cut out The Microphone seems to make a hum and work for around 5 seconds then cuts out and I hear nothing. Just want to see if there is a loose connection somewhere? I have opened it

My Rode NT1a stopped working. I checked preamps My Rode NT1a stopped working. I checked preamps with a phantom power (i use "Art Voice channel" and sometimes kinds of lower class preamp like a ...

My rode nt1a is making buzzing noise i dont know why and i'm using this interface to connect with my laptop http://www.thomann.de/es/the_tbone_micplug_usb.ht The microphone may be picking up powerline