Question about 1700 Laser Printer
...rollers of your printer have been worn. Replace the new rollers. problem is not "lint" it is that the roller will not come down and process paper. Your card is going bad....new printer and make sure ...
...printer, printed it and when the rollers start moving I forcebly pushed the cardboard through. Now it seems to work fine. check in the paper path which might be blocked or some foreign object in the ...
...printer won't pick up paper from the tray . It tries but it won't pick it up and then it says there is a paper jam(0) but there's not and the paper supply won't let me bypass the casette to go to a ...
...printer with jams and dust. Most folks (including myself) think the rollers are actuated when printing, actually the paper tray causes the rollers to pop down onto the paper stack when you close the ...
...printer. the four rollers are visible..... Clean them with a soft cloth dipped in water & detergent.. (never use alcohol....it kills rubber....) Now rub the rollers with some emery paper or ...
printer and look for any paper jam...remove paper from behind (if any) and roll the rollers in upward direction from behind..close the back door and connect the power cable to the printer and power on
printer and look for any paper jam...remove paper from behind (if any) and roll the rollers in upward direction from behind..close the back door and connect the power cable to the printer and power on
Question about Officejet Pro L7680 All-In-One Printer
...paper loaded in the paper tray. The rubber paper-feed rollers are coated with dust. well push the paper in abitmore then what you did ifyou wont push it in on maximum the printer wont notice the ...
Question about imageCLASS MF6530 Monochrome Laser Copier/Printer
...printer sideways, upside down, but nothing. But lo, behold, in the top outside bin (where paper just comes out), I pulled the rollers (they don't fully come out, but just drop a bit), and found ...
Question about imageCLASS MF6530 Monochrome Laser Copier/Printer
xerox XC33 wont feed from paper trays Most likely the feed rollers need to be replaced. A company called The Parts Drop would have them. Not hard to change.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions