Questions & Answers for: printer toner changed light

...the High Yield TN660 toner is your printer, then the drum needs changing every 3-4 toners. If using the low yield TN6300 toner then your drum needs to be replaced every 6-7 toners. Hope this ...

...Printer Problem - Just changed the toner but the type is light. The toner is new. What could be wrong? Quite a few laser printers have a toner save button to conserve toner. That will cause light ...

...toner sensor in this printer that shoots a beam of light through the toner cartridge. As long as the toner is full and blocks the light, it sees it as being full. If it were the sensor, it would tell ...

...Eco / Toner Save mode is disaled on both printer and printer driver. The toner cartridge has plenty of toner and the toner has not been recently changed. your toner has been faulty.pls replace

...light up.after i change the toner, the light still light up. please help!thanks! pls replace the sensor in the printer and also chk after replacing a new toner my docuprint203a toner steady light ...

...toner remaining alert] If printer is not functioning Please change the toner from Genuine dealer. Else your printer fails due to non genuine and refilled toner. if it is working fine besides the ...

...toner, try on your printer with out the toner and then check the indicator led, if the lid paper blink again i thing clean again the drum remove dash paper of the cube and try again until the ...

...toner when i open the switch of my fuji xerox printer all the light on after initialize the light on toner become steady can you help May be problem on mother board or toner unite. If it self change ...

...printer. I have unplugged, shaken toner and even changed whole drum and toner unit with drum from another printer that works fine.(same model drum and toner) -open front cover -press 'Option' button ...

...toner for the printer and the toner The toner light came one and I changed the toner cartridge with a new one. I placed it back into the printer and the toner the toner light came back on. I turned ...