Question about Windows XP Professional With Servise Pack 2 (e8503040) for PC
Installing XP on Nsew SATA(RAID) I made a floppy disk with the RAID drivers, Partitioned the hard disk using xp bootable cd, formatted c:, The setup copied all the need files but failed to copy 3 ...
Raid 5 failure Dear Sir, In ibm 226 server raid 5 with 2003 os .total 4 hdds .0hdd has failed replased 0hdd in the middle of rebuild 3rd hdd failed then how can i recover my data Regards, Siraaj to ...
configuring raid drives Dell Server with 3 scsi drives, would like to set this up with one drive being the c drive with OS and the other two drives as a raid with Parity, is this possible You're going
RAID6 problemme I have 10 Hard disk drive with Raid6. I sow one of the harddisk is not working properly. I sow in raid configure menu "failed" and then i switched off the system and removed out that ...
OS on RAID is corrupt Okay I got a real hummdinger for people who use RAID sets. this guy has a server with the OS on a RAID 0 set and data on a RAID 5 set. The computer says that the files in windows
Question about Windows Server Standard 2003 for PC
...There are three main reasons why the setup gives this error: Your harddrive crashed or you have an raid array that is not recognized by windows, use the drivers for the raid array, some raid ...
access the hard drive during install or startup. So, it sounds like you've got some hardware like a RAID controller that is causing the problems. If you're attempting to install to a single hard drive
Is raid 1 a solid solution Is raid 1 a solid solution For me, RAID 5 is the solid and complete solution. Please check the link and read the fearures of RAID 5: http://www.pcguide.com/ref/hdd/perf/raid
it into my system. I have first formatted the HDD I already had, then configured my BIOS for use of RAID 0. My mobo (MSI K9A2 CF-F) btw has an on-board RAID controller which supports RAID 0, 1 and 0+1
Question about Windows 7 Ultimate for PC
RAID drivers in Windows 7 Ultimate 64bit Setup not detected .I am trying to set up a RAID 0 array with my 2 HDDs. During Windows setup, I am asked to insert a floppy/cd/dvd/usb flash disk with a ...
Usually answered in minutes!
21,070 Questions
1,345 Questions
747 Questions
706 Questions
281 Questions