...Replace compressor and convert to R134 refrigerant.The conversion kit is relatively inexpensive,as the main thing required are the conversion fittings for the high and low ports in the system.Have a ...
...R12 added, but it is starting to get expensive for the R12. Any suggestions? Thanks in advance Bernie from Texas If you dont want to replace the compressor you can retro fit it to R134 for around
...replace fron in 93 ford probe What freon do i use for a 1993 ford probe GT 6 cylinder. 134, 12, etc? 1993 is a split year, if you have charging ports are a little bigger than the size of a tire valve ...
...r12 refrigerant in it and I want to convert it to r134a. Once I evacuate the system, do I have to put ester oil back in the system or can I simply replace the old refrigerant with the R134a? You need ...
r12 leaked out then r134 will leak even faster .. its a smaller molicule and needs a tighter system .. so your system would have to be repaired ..maybe hoses replaced ... even if you could do all that
what type of refridgerant of freon does a 90 toyota corolla use? R12 but you can have it change to take R134 Originally the refridgerant was R12 but has been replaced with R134 or equivalent.
...R12) years ago ... R134 is a smaller molicule so it leaks out much more easily ... in many cars it has to be topped off periodically ...there are kits available (with a gage) that will allow you to ...
...R12, it is no longer available, you must convert it to R134, this requires the compressor and reciever dryer be replaced and the system flushed out and the new PAG R134 refrigerant oil be added ...
R12 gas operates at a far lower pressure that r134a so if you want to use r134a gas you will have to replace compressor ,evaporator and condenser and have a cooling fan for the condenser fitted We did
Usually answered in minutes!
4,236 Questions
3,747 Questions
3,350 Questions
3,279 Questions
3,218 Questions
