Questions & Answers for: sandpaper Vacuums

...is scarred any way the belt will rub see if the roller is messed up i found if u use a piece of sandpaper and smooth it out a little it should be

How to attach sand paper to the Kirby Turbo Sander attachment? How do you attach the sandpaper to a Kirby Turbo Sander attachment? All I see on the bottom is a rubber pad with adhesive at both ends, ...

...is still giving me the change battery alert. Remove the batteries and using an emory board or fine sandpaper scratch up the metal pieces where the battery ends make contact inside the unit. It could ...

...above the door. What's a good way to get rid of the stain. you need to sand that stain down with sandpaper and then re-paint the area with a high temperature paint......hardware stores should sell ...

I have lost the manual and don't remember how to clean my iron get a sandpaper to clean it

...stubborn stains from the iron sole. However, for realy stubborn problems I would use very fine sandpaper with a grit of aproximately 1200. With a fair amount of rubbing or sanding it should be ...

...a problem with corrosion on the plugs...take your connections loose and lightly sand with fine grit sandpaper the metal ends. Plug the wires back together and see if it works...if not then it may be ...

how to remove scorch marks scorch marks on a laqueredtable dining table not sure if it was a hot dinner plate Try Magic Eraser, otherwise sandpaper it lightly and paint a thin coat of laquer back on.

...the contacts between the battery and the iRobot get corroded...you can try using a small piece of sandpaper to lightly scuff/clean the battery contacts. Once you put it back together, try the reset ...

...from mains so it's not live with 240v an give the contact a gentle clean an if u have any fine sandpaper just scratch it across surface few times. Helps to make a better cleaner contact ...