Question about Compaq ProLiant DL380 G4 Server
set-up with 5 hard disks with the first two configured for the OS (C drive, Win 2003) {RAID 1+0 - Drive Mirroring} and the remaining 3 as RAID 5 (Drive E:). Problem: The first array C drive is running
Question about Compaq ProLiant ML530 Server
not support the controller. In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET
Question about Compaq ProLiant ML350 (116185-031) Server
into the server bios I need to configure the raid system, but during the booting process I din't see the bios set up when u power up the computer press F2 or del key to enter in bios then inable raid
...you using (RAID 0,1,5, etc.)? Some RAID configurations allow you to replace a failed drive and not lose data, but I will need to know more about how you set the system up in order to help you
HP Proliant ML110 Server RAID setting I've transfered data from a previous server into a Proliant ML110 server hardisk using a 3.5 hardisk enclosure. then I've put the hardisk back in and I find out ...
...set up. ?Creating the RAID volume. 1.Enter the embedded SATA setup by pressing f8 during post. 2.Enter the array configuration utility. 3.Enter create array. 4.Create the raid volume as desired. ...
Question about Pavilion a1410n (ER890AA) PC Desktop
...set on raid or achi and disable them ..and let it on ide compatible or on native .. and save the changes with f10 and exit .. If this was teh issue .. and you changed the settings and the raid driver ...
Question about Compaq ProLiant ML350 G3 Server
...SCSI drive is powered off. BIOS seems correct. Try to disable boot to other device on your bios setting.Make sure that your Smart Raid is set on the first boot device. ML350 G3 - No SCSI Devices ...
Question about Compaq ProLiant ML350 G3 Server
set up with a RAID configuration? Do you have the Dell monitoring software installed? Is it set up with Hot Plug drives? If so replacing the drive with a new one will start the RAID rebuild. Otherwise
Question about ProLiant DL580 G5 (438087-001) Server
...After you replaced the drive, did you rebuild the RAID array? Some of the higher end RAID controllers will try to rebuild automatically (if set to do so) but most must be rebuilt
Usually answered in minutes!
5,067 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
