Questions & Answers for: HP setting up raid 1 Computers & Internet

ugrade of DL380 G4 Server HDD Raid Array 36GB --->146GB Required Server: HP Compaq DL380 G4 Current HDD Size: 36GB 15K RPM No of Drives in Server: 5 The DL380 G4 is set-up with 5 hard disks with the ...

problem with scsi driver proliant ml 370 for NT4 when i boot server for reformat partition C:\ server can't detect hardisk... Are you attempting to boot from the Windows CD? If you are booting the ...

I don't know how to get into the server bios I need to configure the raid system, but during the booting process I din't see the bios set up when u power up the computer press F2 or del key to enter ...

harddrive array sequence causing system in booting one of the harddrive failed in primary server and we changed a drive taking from secondary server which worked for few hours but later system is not ...

RAID setting I've transfered data from a previous server into a Proliant ML110 server hardisk using a 3.5 hardisk enclosure. then I've put the hardisk back in and I find out that the RAID setting make

enable RAID system use this guide, this is fo the embedded sata raid controller that comes standar with the ml150 g5. Enabling SATA RAID functionality in the BIOS Setup Utility: 1.Boot the server, and

My computer says Disk Read error. What should I do? first go to bios settings and see if the sata bus is set on raid or achi and disable them ..and let it on ide compatible or on native .. and save ...

...SCSI drive is powered off. BIOS seems correct. Try to disable boot to other device on your bios setting.Make sure that your Smart Raid is set on the first boot device. ML350 G3 - No SCSI Devices ...

Blinking red light and beep sound coming from the front blade Slot 1. Blinking red light and beep sound coming from the front blade Slot 1. - HP Proliant BL465 G6 That drive has failed, is it set up ...

Recently I had replaced one of HDD of my DL580 service Raid 5 configuration. After that everything working fine including user connectivity and database access. My question is both the LEDs on replace